Replacing The Display Assembly; Procedure; Post-Requisites - Dell P63F Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Place the display assembly on a clean, flat surface.
2 Place the palm-rest assembly on the display assembly.
3 Close the display hinges and align the screw holes on the display hinges with the
screw holes on the palm-rest assembly.
4 Replace the three screws (2.5x8) that secure the display hinges to the palm-rest
assembly.
5 Route the antenna cables through the routing guides on the palm-rest assembly.
6 Connect the display cable and close the latch to secure the cable.
7 Route the display cable through the routing guides on the palm-rest assembly.
8 Adhere the tape that secures the display cable to the palm-rest assembly.
9 Close the display and turn the computer over.

Post-requisites

1 Replace the wireless
2 Follow the procedure from step 2 to step 8 in
3 Replace the keyboard.
4 Follow the procedure from step 4 to step 5 in
5 Replace the battery.
computer. After working inside your computer, follow
After working inside your
card.
computer. For more safety best
www.dell.com/
"Replacing the base
"Replacing the optical
Before
cover".
drive".
91