Replacing the solid-state drive
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the hard
drive.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Adhere the thermal pad to the solid-state drive.
2
Slide the solid-state drive at an angle into the solid-state drive slot.
3
Press the other end of the solid-state drive down and replace the screw that
secures the solid-state drive to the system board.
Post-requisites
1
Replace the battery.
2
Replace the
base
computer. After working inside your computer,
After working inside your
cover.
Replacing the solid-state drive (full-length)
(full-length)
computer. For more
11
30