Removing The Solid-State Drive (Full-Length); Prerequisites; Procedure - Dell XPS 15 Service Manual

Removing the solid-state drive
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the hard
drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the
computer is in sleep or on state.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the base
2 Remove the battery.
Procedure
1 Remove the screw that secures the solid-state drive to the system board.
2 Lift and slide the solid-state drive from the system board.
computer. After working inside your computer,
After working inside your
cover.

Removing the solid-state drive (full-length)

(full-length)
computer. For more
10
27