Replacing the wireless card
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
CAUTION:
To avoid damage to the wireless card, do not place any cables
under it.
1
Align the notch on the wireless card with the tab on the wireless-card slot and
slide the card into the slot.
2
Connect the antenna cables to the wireless card. The following table provides
the antenna-cable color scheme for the wireless card supported by your
computer:
Connectors on the wireless
card
Main (white triangle)
Auxiliary (black triangle)
Multiple input, multiple output
(grey triangle)
3
Align the screw hole on the wireless-card bracket with the screw-hole on the
wireless card.
4
Replace the screw that secures the wireless-card bracket to the wireless card.
computer. After working inside your computer,
After working inside your
Antenna-cable color
White
Black
Grey (optional)
computer. For more
Replacing the wireless card
15
36