Replacing The Fans; Procedure - Dell XPS 15 Service Manual

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

• Post-requisites
Procedure
1 Align the screw holes on the processor fan (JFAN_1) with the screw holes on
the palm-rest assembly.
2 Connect the processor fan (JFAN_1) cable to the system board.
3 Route the display cable through the routing guides on the processor fan
(JFAN_1).
4 Replace the screws that secure the processor fan (JFAN_1) to the system
board.
5 Align the screw holes on the video fan (JFAN_2) with the screw holes on the
palm-rest assembly.
6 Connect the video fan (JFAN_2) cable to the system board.
7 Route the touch-screen cable through the routing guides on the video fan
(JFAN_2).
8 Adhere the tape that secures the touch-screen cable to the video fan (JFAN_2).
9 Connect the display cable to the system board.
10 Replace the screws that secure the video fan (JFAN_2) to the system board.

Replacing the fans

computer. After working inside your computer,
After working inside your
17
computer. For more
Replacing the fans 41