Removing the display assembly
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
wireless
Procedure
1
Remove the screw that secures the display-cable bracket to the system board.
2
Disconnect the touch-screen cable and display cable from the system board.
3
Peel off the tape and remove the touch-screen cable from the routing guides
on the fan.
computer. After working inside your computer,
After working inside your
cover.
card.
computer. For more
Removing the display assembly
28
64