Removing The Solid-State Drive (Full-Length); Prerequisites; Procedure - Dell XPS 15 Service Manual

Identifier
Status

Removing the solid-state drive (full-length)

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the base cover.
2 Remove the battery (half-length)
Identifier
Status

Procedure

1 Remove the screw (M2x3) that secures the solid-state drive to the system board.
2 Lift and slide the solid-state drive assembly from the system board.
34 Removing the solid-state drive (full-length)
GUID-CA63CF9E-83FD-4B12-9A33-5E7A4DBAB972
Released
computer. After working inside your computer, follow the instructions in
GUID-28F89DF8-99BB-4B9C-88D1-6DB4494163CF
Released
or the battery (full-length).
GUID-7B2E5A47-FAA4-4AA9-B3F5-2284E315C53B
Released
15
After working inside
www.dell.com/