Table of Contents
Advertisement
Domestic ventilation unit M Flex Air (Plus)
8
Operation
8.1 General
The ventilation unit can be operated with no additional control
components. It is operated on the display and the control unit.
Other optional control elements and sensors can also be con-
nected.
CAUTION!
Do not operate the ventilation unit if it is visibly damaged. Dis-
connect the unit from the power supply and inform your in-
stallation engineer.
After a power failure, the ventilation unit starts automatically at
speed 1 (reduced ventilation) or at the speed defined in the ser-
vice menu.
HINWEIS
NOTE
Only switch off for a short time, e.g. for a filter change. There
is a risk of moisture damage if the ventilation unit is switched
off for a long period!
8.1.1 Display and control on the unit
1
Fig. 8.1:Display and control unit
1
Display and control unit
2
LCD display
3
key (back/down)
4
OK key (select/save)
5
key (next/up)
Within the menu levels:
Level down: OK key
Level up: key for 1 sec
www.glendimplex.de
8.1.2 Basic display
The basic display contains information about the current oper-
ating status of the ventilation unit.
Fig. 8.2: Basic display
1
Operating status
2
Day/Time
3
Fireplace function active
4
Timer program active
5
Bypass active/open
DOK4SVxxDEN · FD 9912
English
21
Advertisement
Table of Contents
