Table of Contents
Advertisement
Operation
Note: Before usage, ensure you check if the voltage and frequency complies with
local power supply.
ON/OFF
Press the switch of the digital display screen in the centre of the unit to turn the
device on.
WIND SPEED
Rotate the switch to select wind speed. This device uses a stepless speed
functionality. Rotating the switch to the right will gradually increase the wind speed.
The light around the switch is a determination of the wind speed. When the light
ring is completely full, this means the device is operating on maximum wind speed.
When the battery power is less than 40%, the fan will enter a low rotation wind
speed.
OSCILLATION
Press the switch for 3 seconds to enable the fans automatic swing function. The fan
will oscillate up to 60° left and right. To stop this function, press the switch again for
3 seconds.
TILT HEAD
This unit has tilt head functionality. You can tilt the head of the fan 300
up or down
°
to angle the fan head to your preferred position.
8
Advertisement
Table of Contents
