Intended Use Of The Ventilation Unit; Area Of Application; Functional Principle - Dimplex M Flex Air Installation And Operating Instruction

Domestic ventilation unit
Hide thumbs Also See for M Flex Air:
Table of Contents

Advertisement

Domestic ventilation unit M Flex Air (Plus)
2

Intended use of the ventilation unit

2.1 Area of application

The ventilation unit is designed for controlled purging and ven-
tilation in frost-free living areas. Air ducts are used for the air cir-
cuit.
Connecting extractor hoods to the ventilation system is not
permitted. The ventilation unit is not designed for drying struc-
tures.

2.2 Functional principle

The ventilation unit is equipped with two energy-saving and
quiet running fans and provides for a controlled air exchange in
apartments and residential buildings.
Used air in the rooms with the highest levels of humidity and
odours is extracted as exhaust air and transported outside as
extract air through an air duct system. Examples of exhaust air
rooms include bathrooms and kitchens. At the same time, fresh
outside air is sucked in and brought into living rooms and bed-
rooms as supply air.
The two separate air flows are directed through a cross current
counter flow heat exchanger. This heat exchanger recovers
most of the heat from the exhaust air and uses it to heat up the
supply air. The building thus retains the majority of its heat en-
ergy.
The integrated bypass can direct outside air past the heat ex-
changer directly into the supply air rooms. Heat recovery is de-
activated in this case.
www.glendimplex.de
Hallways are usually overflow areas through which air flows
from supply air rooms to exhaust air rooms. An unhindered
overflow is achieved with undercut doors or overflow grilles.
Fig. 2.1:Schematic representation of supply/exhaust air system with heat re-
covery
1
Outside air (SAI)
2
Supply air (SAO)
3
Exhaust air (EAI)
4
Extract air (EAO)
5
Ventilation unit
6
Air distributor
7
Overflow air vent
The star-shaped structure of the air duct system shown, with
direct pipe sections between the air distributors and the supply
air/exhaust air valves
Simplifies the volume-flow balance and pressure balance
Avoids sound transmission from adjacent rooms
Simplifies cleaning due to direct pipe sections
DOK4SVxxDEN · FD 9912
English
A
Supply air area
B
Exhaust air area
C
Overflow area
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

M flex air plus3vshcs3vshce

Table of Contents