Advertisement
Assembly
1. The fan body is ready assembled, however the feet need to be attached to the
fan base.
2. Attach the 2 x feet to the base of the fan by aligning the holes, and securing with
the (4) screws provided. Stand the fan upright to begin using.
IMPORTANT: Ensure the feet are properly secured before placing upright on a firm
stable surface.
Operation
1. Once the feet are assembled onto the fan body, stand the unit upright on a firm
stable surface.
2. Connect the plug to a power outlet and switch on.
3. Turn the fan ON by rotating the speed control switch at the top of the unit in a
clockwise direction. This switch is also used to adjust the fan SPEED.
4. To adjust the fan SPEED turn the speed control switch from LOW "1" - MEDIUM
"2"- HIGH "3" in sequence.
5. Turn the switch anti-clockwise to the "0" position to turn the fan OFF.
7
Advertisement
