Dimplex M Flex Air Installation And Operating Instruction page 30

English
8.4.7 Service menu 60 – Information
61Software
Shows the configured or installed software version.
62Unit config.
Shows the loaded basic configuration of the ventilation unit.
63Control elem.
Shows whether the digital inputs are configured for a sensor.
1s
1s 1s
Display Display of configured unit
Software version
28
1s 1s
Display of configured control Display of programmed
element sensor 1
.
DOK4SVxxDEN · FD 9912
Domestic ventilation unit M Flex Air (Plus)
Note: If a standard configuration has been selected for a control
element and then changed later, the display "user defined" ap-
pears.
64,65 Sensor 1 / Sensor 2
Shows the configuration of the internal sensors.
HINWEIS
NOTE
Further information on the status and operation of the ventila-
tion unit can be displayed in user menu under 30 - Informa-
tion.
1s
Operat.hours total:
On, Off, Automatic,
Speed 1, Speed 2, Speed3,
Pre-Heater 1,2,3,
Display of programmed
sensor 2
Display Serial number
Post-Heater
www.glendimplex.de