Adding A New Handset - VTech DS3111-2 User Manual

Installation

Adding a new handset

Your telephone can accomodate up to five cordless handsets. You can add new
• If the registration
handsets (DS3101, purchased separately) to the DS3111-2/TM3111-2/DS3111-
is not successful,
3/DS3111-4 at any time, but each handset must be registered with the telephone
the display
will show NOT
base before use.
REGISTERED. To
The DS3111-2/TM3111-2/DS3111-3/DS3111-4 comes with two/three/four registered
reset the handset,
handsets (named HANDSET 1, 2, 3 and 4). Additional handsets will be assigned
remove the
handset from the numbers in the order they are registered (HANDSET 3, 4 and 5). You can register
telephone base or
a maximum of five handsets.
charger and place
Before using a new DS3101 handset, you must register it with the telephone base.
it back in. Try
the registration Each handset must be registered separately.
process again.
To register a handset to your telephone base
• You cannot
register a handset
When first purchased, all optional accessory handsets show
if any system
NOT REGISTRED on the screen. The handset may need to
handset is in use.
be charged for at least five minutes before registering to the
telephone base. To register a handset:
1.
6
Place the unregistered handset in the telephone base or
charger. If PRESS FIND HNDST 4 SEC ON BASE does
not appear on the handset screen after a few seconds,
www.vtechphones.com
NOT REGISTERED
PRESS FIND HNDST
4 SEC ON BASE