VTech DS3111-2 User Manual page 19

Telephone settings
Voicemail setup
To program a pause:
• A single pause
(approximately 1.
three seconds)
2.
is automatically
3.
programmed
between the
access number
4.
and the password
when you
To reset all codes to the default ones:
program your
1.
VOICEMAIL
button so that
2.
your voicemail
3.
service will
recognize your 4.
password.
5.
Depending on
your voicemail
service, you
may need to
program an extra
pause between
the access
number and your
password.
16
Press MENU/SELECT when the handset is not in use.
to select VOICEMAIL SETUP, then press MENU/SELECT twice.
Press or
The blinking cursor should be at the end of your access number. Press and hold
the REDIAL/PAUSE button until a P appears.
Press MENU/SELECT. You will hear a confirmation tone.
Press MENU/SELECT when the handset is not in use.
Press or to select VOICEMAIL SETUP, then press MENU/SELECT.
to select RESET ALL CODES, then press MENU/SELECT.
Press or
The screen displays RESET CODES?
Press MENU/SELECT. You will hear a confirmation tone.
www.vtechphones.com