Belt Clip & Headset - VTech DS3111-2 User Manual

Installation
Belt clip & headset (optional)
For hands-free telephone conversations, use any industry standard 2.5mm headset
(purchased separately). For optimal results, use a VTech 2.5mm headset.
Whenever a compatible headset is connected to the cordless handset, the
microphone on the handset will be muted.
Headset
Plug the 2.5 mm headset
into the jack on the side of
the handset (beneath the
small rubber flap).
Belt clip
To install the belt
clip, snap the belt
clip into the notches
on both sides of the
handset.
www.vtechphones.com
To release the belt clip
from the handset, carefully
pry one side up from the
notch. The belt clip will
now easily detach from the
handset.
• To purchase a
headset, visit our
website at www.
vtechphones.com
or call 1 (800)
595-9511 in the
United States.
In Canada, go to
www.vtechcanada.
com or call
1 (800) 267-7377.
• If the sound
quality of the
headset is
unsatisfactory, try
unplugging and
firmly plugging it in
again.
9