Adding Your New Handset - VTech DS3101 User Manual

• If the registration
is not successful,
the display will
show NOT
rEGISTErED.
To reset the
handset, remove
the handset from
the telephone
base or charger
and place it
back in. Try
the registration
process again.
• You cannot
register a handset
if any telephone
connected to the
same telephone
line is in use.
4
Getting started

Adding your new handset

The DS3101 handset needs to be registered to the telephone
base before use. It will show NOT rEGISTErED on the
screen when newly purchased. You can register up to 5
handsets to the same telephone base.
To register a handset to your telephone base:
Before registering an additional handset, make sure that the
handset battery is installed and charged.
1. Place the unregistered handset in the telephone base or
charger. If PrESS FIND HNDST 4 SEC ON BASE does
not appear on the handset screen after a few seconds,
remove the handset and place it in the telephone base
or charger again.
www.vtechphones.com
NOT REGISTERED
PRESS FIND HNDST
4 SEC ON BASE