Belt Clip & Headset (Optional) - VTech DS3111-2 Manual

Installation
Belt clip & headset (optional)
For hands-free telephone conversations, use any industry standard 2.5mm headset (purchased
separately). For best results, use a VTech 2.5mm headset.
Headset
Plug the 2.5 mm headset into the
jack on the side of the handset
(beneath the small rubber flap).
HANDSET 1
DS3111-2 CIB 071607.indd 5
Belt clip
Install belt clip as shown below.
Snap the belt clip To release the belt clip from
into the notches the handset, press on both
on both sides of flaps of the belt clip.
the handset.
Pull and unlock one flap
from the notch first before
detaching the whole belt
clip from handset.
www.vtechphones.com
• To purchase a
headset, visit our
website at www.
vtechphones.com or
call 1 (800)
595-9511. In
Canada, go to www.
vtechcanada.com or
call 1 (800) 267-7377.
• Whenever a
compatible headset
is connected to the
cordless handset,
the microphone on
the handset will be
muted.
• If the sound quality
of the headset is
poor, try unplugging
it, and firmly plugging
it in again.
5
7/28/2007 5:55:41 PM