Removal From Crate - Yamaha RX10K Assembly Manual

REMOVAL FROM CRATE

1. Open the fastener of plastic cover.
(One side fastener)
2. Remove the plastic cover 1 .
3. Remove the bolts 2 and then remove the
top of the crate 3 .
4. Remove the bolts 4 and then remove the
sides of the crate.
5. Remove the carton box.
6. Remove the bolts 5 and then remove the
brackets 6 .
NOTE:
The bolts and brackets installed on handlebar
holder are not used for installation.
7. Remove the hook 7 .
(Right side)
1-5