Table of Contents
Advertisement
To assemble the snowmobile correctly, supplies (i.e., greases, shop rags, etc.) and working space are required.
Workshop
The workshop where the snowmobile is assembled, should be clean and large. The floor should be level.
Self-protection
Protect your eyes with suitable safety glasses or goggles when using compressed air, when grinding or when
doing any operation which may cause particles to fly off.
Protect hands and feet by wearing safety gloves or shoes.
SYMBOLS USED ON TRANSPORT PACKAGE COVER
Contents of the transport package are frag-
ile therefore it must be handles with care.
Indicates correct upright position of the
transport package.
Transport package must be kept away from
rain.
Up to 9 of the transport packages can be
piled up.
Only stack this unit with transport packages
of the same size.
Made of high-density polyethylene.
Do not step anywhere on this transport
package.
PREPARATION
a : IMPORTANT
This unit delivered to carrier in a good condition. For
protection against loss due to damage, inspect thor-
oughly. If damage is noted, make note on freight bill.
Shipper assumes no further liability to the trans-
portation company. Your claim should be filed
against carrier for damage of any nature.
b : WARNING
D Only stack this unit with same crate size.
D Assure units are stacked securely (All four
corners fit securely onto bottom unit).
D Maximum handling (transport & movement)
stack – 3units.
Advertisement
Table of Contents
