Engine Oil; Engine Oil Level - Yamaha RX10K Assembly Manual

Hide thumbs Also See for RX10K:
Table of Contents

Advertisement

ENGINE OIL

Use a combination of the recommended SAE
and API oil classifications shown in the chart be-
low.
CAUTION:
D Use only 4-stroke engine oil.
D Engine oil also lubricates the starter
clutch. In order to prevent clutch slip-
page, do not mix any chemical additives
with the oil or use oils of a higher grade
than "CD". In addition, do not use oils la-
beled "ENERGY CONSERVING II" or hig-
er.

ENGINE OIL LEVEL

The engine oil level should be checked before
each use.
CAUTION:
Do not run the engine with too much or not
enough oil in the oil tank. Oil could flow into
the air filter case and the engine could be
damaged.
Checking the engine oil level
1. Place the snowmobile on a level surface
and apply the parking brake.
2. Start the engine, warm it up for 10 – 15 min-
utes, and then turn it off.
3. Disconnect the oil level gauge coupler 1 .
CAUTION:
Disconnect the oil level gauge coupler be-
fore removing the oil level gauge/dipstick.
Otherwise the cable can twist and become
severed.
4. Remove the oil level gauge/dipstick 2 ,
wipe it clean, insert it back into the filler hole
(without screwing it in), and then remove it
again to check the oil level.
3-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx10rkRx10rskRxw10kRxw10skRx10mkRx10msk

Table of Contents