CONTROL ROD ADJUSTMENT
(RX10K, RX10RK, RX10RSK)
Control rod stroke a
1. Loosen the locknut 1 .
2. Check the adjusting rod length using the
scale on the special wrench 2 included in
the owner's tool kit.
3. Turn the adjusting rod 3 in direction a or
b to adjust the control rod stroke.
Adjusting
MIN
position
Decrease
Effect
b
pitching
Standard
4. While holding the adjusting rod 3 securely,
tighten the locknut 1 .
Locknut:
35 Nm (3.5 mSkg, 25 ftSlb)
3-26
STD
MAX
Increase
z
! a
weight
transfer
STD