ADJUSTMENTS AND
PREDELIVERY SERVICE
The following adjustments and pre-delivery ser-
vice must be made before delivery of the ma-
chine to a customer.
SHEAVE OFFSET ADJUSTMENT
1. Open the shroud:
2. Remove:
S Drive V-belt guard
S Drive V-belt
3. Measure:
S Sheave offset a
Use the sheave gauge.
Out of specification ! Adjust.
Sheave offset:
15 ± 1.5 mm (0.59 ± 0.06 in)
(13.5 X 16.5 mm
(0.53 X 0.65 in))
Sheave gauge:
YS-42421-1
NOTE:
Push the secondary sheave toward the inside of
vehicle frame first and measure the sheave off-
set.
3-1