Yamaha RX10K Assembly Manual page 27

4. Adjust:
S Sheave offset
Adjustment steps:
S Apply the brake to lock the secondary sheave.
S Remove the bolt (Secondary sheave) 1 ,
washer 2 and secondary sheave 3 .
S Adjust the sheave offset by adding or remov-
ing shim(s) 4 .
Adding shim ! Offset is increased.
Removing shim ! Offset is decreased.
Shim size:
Part Number
90201-25526
S Install the secondary sheave, bolt (secondary
sheave) and washer.
Bolt (secondary sheave):
64 Nm (6.4 mSkg, 46 ftSlb)
S Recheck the sheave offset. If out of specifica-
tion, repeat the above steps.
NOTE:
When adjusting the sheave offset, the second-
ary sheave free play (clearance) should be ad-
justed.
5. Measure:
S Secondary sheave free play (clearance) c
Use a feeler gauge.
Out of specification ! Adjust.
Secondary sheave free play
(clearance):
1.0 X 2.0 mm (0.04 X 0.08 in)
6. Adjust:
S Secondary sheave free play (clearance)
Adjustment steps:
D
Apply the brake to lock the secondary
sheave.
D
Remove the bolt 1 and washer 2 .
D
Adjust the secondary sheave free play
(clearance) by adding or removing a
shim(s) 3 .
Shim size:
Part number
90201-252F1
90201-22527
3-2
Thickness
2.0 mm (0.08 in)
Thickness
0.5 mm (0.02 in)
1.0 mm (0.04 in)