Yamaha RX10K Assembly Manual page 67

Hide thumbs Also See for RX10K:
Table of Contents

Advertisement

37
Route the coolant hose be-
tween the upper vacuum hose
and lower vacuum hose.
38
Route the vacuum hose under
the coolant hose.
39
Route the vacuum hose over
the coolant hose.
40
Clamp the coolant hose and
vacuum hose.
41
Clamp the coolant hose and
vacuum hose 2.
42
Point the pawl of clip to the up-
ward.
43
Clamp the throttle position
switch lead.
44
Throttle position sensor lead
coupler. (under the vacuum
hose)
45
Drive guard bracket
46
Connect the battery negative
lead to the starter motor mount-
ing bolt.
47
Clamp the throttle position
switch lead and carburetor
switch lead.
48
Voltage regulator
49
Carburetor heater relay
50
Headlight relay
51
Main relay
52
Back buzzer (RX10RK, RX10
RSK, RXW10K, RXW10SK)
53
Flange nut
54
Hexagon bolt
55
Two pole coupler for A.C.mag-
neto.
56
Between two pole coupler for
A.C.magneto leaf and the
clamp is set to 20 mm (0.79 in)
or less.
6-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx10rkRx10rskRxw10kRxw10skRx10mkRx10msk

Table of Contents