A
B
6. Connect the positive (+) cable 1 (red
cable) first, and then the negative (–) cable
2 (black cable) to the battery as shown.
A For RX10K, RX10MK, RX10MSK
B Except for RX10K, RX10MK, RX10MSK
CAUTION:
D Avoid touching wrenches to the ground
of the insulator plate on the muffler when
tightening
terminal
wrench with tape.)
D Never hammer the battery terminals when
connecting the cable terminals to the bat-
tery.
D Make sure battery cables are connected
properly. Reversing the cables can seri-
ously damage the electrical system.
7. Install the battery cover onto the battery.
8. Install the battery band 1 .
9. Install the air cleaner.
3-11
nuts.
(Insulate