Fis-B Weather Status; Stormscope ® Lightning Detection System; Using The Stormscope Page - Garmin G1000 NXI Cockpit Reference Manual

Diamond da62 system software version 2056.10 or later
Hide thumbs Also See for G1000 NXI:
Table of Contents

Advertisement

FIS-B WEaTHER STaTUS

Viewing FIS-B status:
1) Turn the large FMS Knob to select the Aux Page Group.
2) Turn the small FMS Knob to select the 'Aux - ADS-B Status' Page.
Enabling/disabling the FIS-B weather feature:
1) Select the 'Map - Weather Data Link (FIS-B)' Page.
2) Press the MENU Key.
3) Turn the small FMS Knob to highlight 'Enable FIS-B Weather' or 'Disable FIS-B Weather',
and press the ENT Key.
SToRMSCoPE
®
WaRNING: Do not rely on information from the lightning detection system display
as the sole basis for hazardous weather avoidance. Range limitations and interfer-
ence may cause the system to display inaccurate or incomplete information. Refer
to documentation from the lightning detection system manufacturer for detailed
information about the system.
Strike is less than 6 seconds old
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old

USING THE SToRMSCoPE PaGE

adjusting the Stormscope Map Range:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the 'Map - Stormscope®' Page.
3) Turn the Joystick clockwise to increase the map range or counter-clockwise to decrease
the map range.
190-02622-00 Rev. A
LIGHTNING dETECTIoN SySTEM
Lightning age
Lightning age and Symbols
Garmin G1000 NXi Cockpit Reference Guide for the da62
Hazard avoidance
Symbol
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents