Garmin G1000 NXI Cockpit Reference Manual page 83

2) Highlight 'Select Approach', and press the ENT Key. The 'PROC - Approach Loading' Page
is displayed.
3) Select the airport and approach:
a) Use the FMS Knob to select an airport and press the ENT Key.
b) Select an approach from the list and press the ENT Key.
or:
a) If necessary, push the FMS Knob to exit the approach list, and use t he large FMS
Knob to move the cursor to the Approach 'Channel' Field.
b) Use the FMS Knob to enter the approach channel number, and press the ENT Key to
accept the approach channel number. The airport and approach are selected.
4) Select a transition (if required) and press the ENT Key.
5) Set minimums:
a) To set 'Minimums', turn the small FMS Knob to select 'BARO', 'TEMP COMP' or 'RAD
ALT', and press the ENT Key. Turn the small FMS Knob to select the altitude, and
press the ENT Key.
b) If 'TEMP COMP' was selected, the cursor moves to the temperature field. Turn the
small FMS Knob to select the temperature, and press the ENT Key.
or:
To skip setting minimums, press the ENT Key.
6) Press the ENT Key with 'Load?' highlighted to load the approach procedure; or turn the
large FMS Knob to highlight 'Activate' and press the ENT Key to load and activate the
approach procedure.
When selecting a NAVAID exclusive approach, the popup message is displayed: 'NOT
APPROVED FOR GPS - GPS guidance is for monitoring only. Load approach?' With 'Yes'
highlighted, press the ENT Key.
Loading an approach into the active flight plan from the 'NRST - Nearest airport' Page:
1) Select the 'NRST - Nearest Airports' Page.
2) Press the FMS Knob, then turn the large FMS Knob to highlight the desired nearest
airport. The airport is previewed on the map.
3) Press the aPR Softkey; or press the MENU Key, highlight 'Select Approach Window', and
press the ENT Key.
4) Turn the FMS Knob to highlight the desired approach.
5) Press the Ld aPR Softkey; or press the MENU Key, highlight 'Load Approach', and press
the ENT Key. The 'PROC - Approach Loading' Page is displayed with the 'Transition' Field
highlighted.
6) Turn the FMS Knob to highlight the desired transition, and press the ENT Key.
190-02622-00 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the da62
Flight Management
59