Garmin G1000 NXI Cockpit Reference Manual page 79

c) Turn the small FMS Knob to view the available runways. Press the ENT Key to select
the runway. The cursor moves to the 'Transition' Box (only if there are available
transitions). The departure is previewed on the map.
d) Turn the small FMS Knob to view the available transitions. Press the ENT Key to
select the transition. The cursor moves to the 'Sequence' Box. The departure is
previewed on the map.
4) Press the MENU Key to display the 'Page Menu' Window.
5) Turn the FMS Knob to highlight 'Load Departure'.
6) Press the ENT Key to load the departure procedure into the active flight plan.
Loading a departure procedure into a stored flight plan:
1) Select a stored flight plan from the 'FPL - Flight Plan Catalog' Page.
2) Press the Edit Softkey; or press the MENU Key, select 'Edit Flight Plan', and press the
ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
3) Press the Ld dP Softkey; or press the MENU Key, select "Load Departure", and press the
ENT Key. The 'PROC - Departure Loading' Page is displayed.
4) Select a departure. Press the ENT Key.
5) Select a runway served by the selected departure, if required. Press the ENT Key.
6) Select a transition for the selected departure. Press the ENT Key.
7) Press the ENT Key to load the selected departure procedure.
Removing a departure procedure from the active flight plan:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the 'Flight Plan'
Window (PFD).
2) Press the MENU Key, and highlight 'Remove Departure'.
3) Press the ENT Key. A confirmation window is displayed listing the departure procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request, highlight
'Cancel' and press the ENT Key.
or:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the 'Flight Plan'
Window (PFD).
2) Press the FMS Knob, and turn to highlight the departure header in the active flight plan.
3) Press the CLR Key. A confirmation window is displayed listing the departure procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request, highlight
'Cancel' and press the ENT Key.
5) Press the FMS Knob to remove the flashing cursor.
190-02622-00 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the da62
Flight Management
55