Garmin G1000 NXI Cockpit Reference Manual page 128

Hazard avoidance
a) Press the MENU Key and turn the small FMS Knob to highlight 'ADS-B On' or 'ADS-B
Off'.
b) Press the ENT Key.
Testing the display of adS-B traffic:
1) Select the 'Map - Traffic Map' Page.
2) If necessary, turn the Joystick to select a map range of 2 and 6 nm to ensure full test
pattern display.
3) Ensure the adS-B Softkey is disabled. Otherwise the test mode is not available.
4) If the optional TAS is installed, ensure the TaS STBy Softkey is enabled.
5) Press the Test Softkey.
or:
a) Press the MENU Key.
b) Turn the small FMS Knob to highlight 'Test Mode'.
c) Press the ENT Key.
Changing the altitude range:
1) On the 'Map - Traffic Map' Page, select the aLT Mode Softkey.
2) Select one of the following softkeys:
• above: Displays Other Non-Threat and proximity traffic from 9900 feet above the
aircraft to 2700 feet below the aircraft. Typically used during climb phase of flight.
• Normal: Displays Other Non-Threat and proximity traffic from 2700 feet above the
aircraft to 2700 feet below the aircraft. Typically used during enroute phase of flight.
• Below: Displays Other Non-Threat and proximity traffic from 2700 feet above the
aircraft to 9900 feet below the aircraft. Typically used during descent phase of flight.
• UNREST (unrestricted) : All traffic is displayed from 9900 feet above and 9900 feet
below the aircraft.
3) To return to the 'Map - Traffic Map' Page, select the Back Softkey.
or:
1) Press the MENU Key.
2) Turn the small FMS Knob to highlight one of the following options:
• above
• Normal
• Below
• Unrestricted
3) Press the ENT Key.
Garmin G1000 NXi Cockpit Reference Guide for the da62
104 190-02622-00 Rev. A