Flight Instruments; Airspeed Indicator - Garmin G1000 NXI Cockpit Reference Manual

FLIGHT INSTRUMENTS

aIRSPEEd INdICaToR

Enabling/disabling and modifying Vspeed bugs:
1) Press the TMR/REF Softkey to show the 'References' Window.
2) Turn the large FMS Knob to highlight the desired vspeed bug value.
3) Turn the small FMS Knobs to adjust the value for the selected vspeed bug.
4) Turn the large FMS Knob to highlight the ON/OFF field.
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.
Enabling/disabling or restoring default values to all vspeed bugs as a group:
1) Press the TMR/REF Softkey.
Press the MENU Key.
2)
3) Turn the FMS Knob to highlight 'All References On', 'All References Off', or 'Restore
Defaults.
4) Press the ENT Key.
5) To remove the window, press the CLR Key or the TMR/REF Softkey.
Setting the generic timer:
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to select the timer field (HH:MM:SS).
3) Use the FMS Knob to enter the desired time.
4) Press the ENT Key. The Up/Dn field is now highlighted.
5) Turn the small FMS Knob to display the 'UP/DOWN' Window.
6) Turn the small FMS Knob to select 'Up' or 'Dn'.
7) Press the ENT Key. 'Start?' is now highlighted.
8) Press the ENT Key to start the timer. The field changes to 'Stop?'. If the timer is counting
DOWN, it will start counting UP after reaching zero.
9) To stop the timer, press the ENT Key with 'Stop?' highlighted. The field changes to
'Reset?'.
10) To reset the timer, press the ENT Key with 'Reset?' highlighted. The field changes back to
'Start?' and the digits are reset.
11) To remove the window, press the CLR Key or the TMR/REF Softkey.
190-02622-00 Rev. A
FLIGHT INSTRUMENTS
Garmin G1000 NXi Cockpit Reference Guide for the da62
Flight Instruments
1