Garmin G1000 NXI Cockpit Reference Manual page 100

Hazard avoidance
displaying Time-Lapse NEXRad animation on the 'Map - Weather data Link (XM)'
Page:
1) Press the MENU Key.
2) Turn the FMS Knob to select 'Weather Setup' and press the ENT Key.
3) With 'Product Group 1' selected, turn the large FMS Knob to highlight the 'NEXRAD
Animation' On/Off field.
4) Turn the small FMS Knob to select 'On' or 'Off', then press the ENT Key.
5) To remove the menu, push the FMS Knob or the CLR Key.
displaying Time-Lapse NEXRad animation on navigation maps:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With 'Map Settings' highlighted, press the ENT Key.
4) Turn the FMS Knob to select the 'Weather' Group and press the ENT Key.
5) Turn the large FMS Knob to highlight the NEXRAD Animation On/Off field.
6) Turn the small FMS Knob to highlight 'On' or 'Off' and press the ENT Key.
7) To remove the menu, push the FMS Knob or the CLR Key.
NEXRad (FIS-B)
NoTE: Pilots are encouraged to check additional NOTAM sources to supplement
FIS-B NOTAMs. NOTAMs older than 30 minutes will not be displayed by FIS-B. For
additional information refer to InFO 18008 and AC 00-63.
displaying the NEXRad weather product on the 'Map - Weather data Link (FIS-B)'
Page:
1) Select the 'Map - Weather Data Link (FIS-B)' Page.
2) Press the NXRd Softkey. Each selection cycles though a coverage option displayed in
cyan on the softkey ('Off', 'US', or 'REG', or 'All').
or:
1) Press the MENU Key.
2) Turn the FMS Knob to highlight 'Weather Setup' and press the ENT Key.
3) To enable/disable the display of NEXRAD information for the continental United States,
turn the small FMS Knob to highlight the 'NEXRAD' On/Off field.
a) Turn the small FMS Knob to highlight 'On' to enable the display of NEXRAD for the
continental United States or 'Off' to disable.
b) Press the ENT Key.
Garmin G1000 NXi Cockpit Reference Guide for the da62
76 190-02622-00 Rev. A