Arrivals - Garmin G1000 NXI Cockpit Reference Manual

Flight Management
Removing a departure from a stored flight plan:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page.
2) Turn the small FMS Knob clockwise one click to display the 'FPL - Flight Plan Catalog'
Page.
3) Press the FMS Knob to activate the cursor and turn the FMS Knob to highlight the flight
plan to be edited.
4) Press the Edit Softkey; or press the MENU Key, select 'Edit Flight Plan' and press the
ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
5) Highlight and remove the departure:
a) Turn the large FMS Knob to highlight the white header of the departure.
b) Press the CLR Key. The 'Remove <procedure name> from flight plan?' window is
displayed.
or:
a) Press the MENU Key to display the 'Page Menu' Window and turn the FMS Knob to
highlight 'Remove Departure'.
b) Press the ENT Key. The 'Remove <procedure name> from flight plan?' window is
displayed.
6) With 'OK' highlighted, press the ENT Key. To cancel the request, press the CLR Key, or
highlight 'Cancel' and press the ENT Key.
7) Press the FMS Knob to remove the flashing cursor.

aRRIVaLS

Loading an arrival into the active flight plan using the PRoC Key:
1) Press the PRoC Key. The 'Procedures' Window is displayed.
2) Highlight 'Select Arrival'.
3) Press the ENT Key. The 'PROC - Arrival Loading' Page is displayed.
4) Use the FMS Knob to select an airport and press the ENT Key.
5) Select an arrival from the list and press the ENT Key.
6) Select a transition (if required) and press the ENT Key.
7) Select a runway (if required) and press the ENT Key. 'Load?' is highlighted.
8) Press the ENT Key to load the arrival procedure
Loading an arrival into the active flight plan from the 'WPT - arrival Information' Page:
1) From the 'WPT - Airport Information' Page (first page in the WPT group), press the
STaR Softkey. The 'WPT - Arrival Information' Page is displayed, defaulting to the airport
displayed on the 'WPT - Airport Information' Page.
2) To select another airport, press the FMS Knob to activate the cursor, enter an identifier/
facility name/city, and press the ENT Key.
Garmin G1000 NXi Cockpit Reference Guide for the da62
56 190-02622-00 Rev. A