Garmin G1000 NXI Cockpit Reference Manual page 61

5) To change the waypoint back to a fly-by waypoint, highlight the desired waypoint.
Press the MENU Key, highlight 'Set Fly-By Waypoint', and press the ENT Key. The 'Set
<waypoint> to be a fly-by waypoint?' Window is displayed. With 'OK' highlighted, press
the ENT Key.
Flight Plan airways
A A
dding iRWAys
adding an airway to the active flight plan:
1) Press the FPL Key.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3) Turn the large FMS Knob to highlight the waypoint after the desired airway entry point.
If this waypoint is not a valid airway entry point, a valid entry point should be entered at
this time.
4) Turn the small FMS Knob one click clockwise and press the Ld aIRWy Softkey (MFD
only), or press the MENU Key and select "Load Airway". The 'FPL - Select Airway' Page
is displayed. The Ld aIRWy Softkey or the "Load Airway" menu item is available only
when a valid airway entry waypoint has been chosen (the waypoint ahead of the cursor
position).
5) Turn the FMS Knob to select the desired airway from the list, and press the ENT Key.
Low altitude airways are shown first in the list, followed by "all" altitude airways, and
then high altitude airways.
6) Turn the FMS Knob to select the desired airway exit point from the list, and press the
ENT Key. 'Load?' is highlighted.
7) Press the ENT Key. The system returns to editing the flight plan with the new airway
inserted.
adding an airway to a stored flight plan:
1) On the 'FPL - Flight Plan Catalog' Page, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Press the Edit Softkey; or press the ENT Key, turn the large FMS Knob clockwise to select
"Edit" and press the ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
4) Turn the large FMS Knob to highlight the waypoint after the desired airway entry point.
If this waypoint is not a valid airway entry point, a valid entry point should be entered at
this time.
5) Turn the small FMS Knob one click clockwise and press the Ld aIRWy Softkey (MFD
only), or press the MENU Key and select "Load Airway". The 'FPL - Select Airway' Page
is displayed. The Ld aIRWy Softkey or the "Load Airway" menu item is available only
when a valid airway entry waypoint has been chosen (the waypoint ahead of the cursor
position).
190-02622-00 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the da62
Flight Management
37