Garmin G1000 NXI Cockpit Reference Manual page 202

appendix
(Refer to the Additional Features section). When the system is enabled it will automatically
connect to the preferred device. If the preferred device has not been selected or is not available,
the system will automatically connect to the first of any available, paired devices. The pre-
ferred device can be selected on the 'Aux - Databases' Page from a menu list of paired devices.
Once a connection to the paired mobile device is made, Garmin Pilot makes available data-
bases that can be transferred to the wireless transceiver. If any of these databases is more recent
than the respective standby database on the system, (or if there is no standby database on the
system) those databases will be automatically selected to load. The database updates may be
initiated from the 'Aux Databases' Page, or from other pages on the MFD.
NoTE: The system will only provide a WIFI connection if new databases have been
detected for download on Garmin Pilot WIFI a valid Bluetooth connection. If there
are no database updates required the system will not provide a WiFi signal.
NoTE: If the mobile device has previously connected to the Wireless Transceiver,
and is not connected to another Bluetooth device, the mobile device should connect
automatically to the Wireless Transceiver. If the mobile device is connected to another
Bluetooth device, then the Wireless Transceiver will not automatically connect.
Update databases from any MFd page (except the 'aux - databases' Page):
1) Insert the wireless transceiver SD Card in the bottom slot of the MFD if not already
inserted.
2) Turn the system ON.
3) Press the ENT Key or the right-most softkey on MFD display to acknowledge the startup
screen.
4) On the mobile device, start Garmin Pilot and touch Home > Connext > database
Concierge.
5) Turn the large FMS Knob and select 'Aux'
6) Turn the small FMS Knob and select the 'Aux - Connext Setup'.
7) Ensure that 'WIFI Database Import' is enabled in the 'Device' Window (Refer to Additional
Features section for instructions to enable 'WIFI Database Import').
8) Verify that the mobile device is enabled via Bluetooth in the Bluetooth settings on the
mobile device.
9) In the 'Paired Devices' Window on the 'Aux - Connext Setup' Page, ensure the system
is paired with the mobile device in use. (Refer to Additional Features for instructions on
connection to a preferred device).
Garmin G1000 NXi Cockpit Reference Guide for the da62
178
.
190-02622-00 Rev. A