Yamaha F225F Service Manual page 523

2. Fill the gear pump housing with the
recommended fluid to the proper level a.
Recommended PTT fluid: ATF DEXRON II
3. Turn the joint a using a screwdriver to
remove any air between the pump gear
teeth.
4. Remove all of the air bubbles using a
syringe or suitable tool.
5. Install a new O-ring b and the PTT
motor assembly c, and then tighten the
PTT motor mounting bolts d to the
specified torque.
reuse an O-ring, always replace it with
a new one.
PTT motor mounting bolt d:
19 N·m (1.9 kgf·m, 14.0 ft·lb)
a
a
NOTICE: Do not
d
c
d
d
b
a
b
c
TIP:
Align the protrusion b on the armature shaft
with the slot c in the joint.
PTT motor
0
1
2
3
4
5
6
7
8
9
10
A
9-44