Yamaha F225F Service Manual page 276

FUEL
e
c
Needle valve assembly screw b:
2 N·m (0.2 kgf·m, 1.5 ft·lb)
Float pin screw e:
2 N·m (0.2 kgf·m, 1.5 ft·lb)
3. Install the damper f, adapter g, filter
h, filter holder i, and lead j.
h
i
TIP:
Connect the Red/Yellow (R/Y) lead to the
positive terminal "+," and the Black (B) lead to
the negative terminal "–."
4. Connect the high-pressure fuel pump
coupler a, and then install the grommet
k and high-pressure fuel pump l.
6-41
Fuel system
b
a
d
g
R/Y
B
f
5. Install a new gasket m and the cover n,
and then tighten the float chamber cover
screws o to the specified torque.
j
Float chamber cover screw o:
2 N·m (0.2 kgf·m, 1.5 ft·lb)
6. Install the check valve p, the filter q, a
new gasket r, and the cover s, and
then tighten the cover bolts t to the
specified torque.
q
p
l
k
o
m
s
r
a
n
t