Yamaha F225F Service Manual page 277

Cover bolt t:
2 N·m (0.2 kgf·m, 1.5 ft·lb)
7. Install the pressure regulator u and
holder v, and then tighten the pressure
regulator screw w to the specified
torque.
8. Install a new gasket x and the fuel
cooler cover y, and then tighten the fuel
cooler cover screws z to the specified
torque.
w
v
u
y
x
Pressure regulator screw w:
4 N·m (0.4 kgf·m, 3.0 ft·lb)
Fuel cooler cover screw z:
4 N·m (0.4 kgf·m, 3.0 ft·lb)
9. Install the drain hose A and drain screw
B, and then tighten the drain screw B to
the specified torque.
Drain screw B:
2 N·m (0.2 kgf·m, 1.5 ft·lb)
Vapor separator and high-pressure fuel pump
z
B
A
0
1
2
3
4
5
6
7
8
9
10
A
6-42