Yamaha Nuage Setup Manual page 116

【VST Connections - Completed】
TIPS：
When using the Control Room function, it is necessary to turn on the Control Room. To turn on
Control Room, click the power switch botton to turn on the green light on Control Room in VST
Connections or Control Room Mixer screen
Tip:
In some cases, even if you play back a 5.1-channel project, you will only be able to hear it as
left/right stereo. This is because, even with the control room's main mix set to 5.1ch, it is converted
by MixConvert so that it can be monitored in stereo. To find out what channel format will be used
for playback in the control room, check the Control Room section of the Control Room Mixer
window. Here, if "5.1 > Stereo" is shown, 5.1-channel sound will be converted to stereo.
【Control Room Mixer (Control Room)】
116