Adjusting Mixer Window Positions; Adjust Left/Right End Of The Screen - Yamaha Nuage Setup Manual

Tip:
To check whether the mixer window is displayed on the right monitor, open a project or create a
new one, and then press any SEL button on the Nuage Fader. Check to see whether the channel
strip corresponding to that channel has a white outline. If it is shown correctly above the SEL
button that you pressed, then your settings are correct.
Next, adjust the display region of the mixer window. The first time it is launched the window will
not have the correct left/right positioning. Use your mouse to drag the left and right edges of the
window to the correct positions.

【Adjusting Mixer window positions】

【Adjust left/right end of the screen】

105