Connecting R Series Units - Yamaha Nuage Setup Manual

Configure all the remaining input channels on VST Connections and they are displayed and can be
controlled from Nuage Fader.
TIPS:
The only parameters that can be displayed/controlled are "HA GAIN" and "HA TRIM". If you want
to change more parameters such as HPF (High Pass Filter) on/off and frequency, and +48V on/off,
press "e" button for each channel to open Channel Settings window. Also, the parameter bar for HA
Gain moves to the opposite side, however, this is due to the spec of AD8HR.

6-13. Connecting R Series units

R series, analog – Dante converter, can be connected to Nuage and it can control various head
amp-related parameters (Version 1.5 or later). Although R series are not recognized and displayed in
the Workgroup Manager, HA remote control can be done by adding the input channels on Nuendo
that have been patched on Dante Controller.
122