Yamaha Nuage Setup Manual page 139

Using the DigiLink cable, connect PRIMARY PORT on HD I/O and PORT 1 connector on HDX
card.
Next, connect Loop Sync (LS) on HD I/O and that on Sync HD, by connecting LS OUT on Sync HD
and LS IN on HD I/O and connecting LS OUT on HD I/O and LS IN on Sync HD, using BNC
cables.
By using XLR cables, connect TIMECODE OUT on SyncStation and LTC IN on Sync HD.
Similarly, connect LTC OUT on Sync HD and TIMECODE IN on SyncStation.
139