Table of Contents
Advertisement
When the bus is correctly configured, it appears on the NUAGE Fader screen as below.
【9.1 Dolby Atmos bus on NUAGE Fader】
If you create a mono/stereo/5.1/9.1 Atmos track, you will see the pan position of each track on the
NUAGE Fader screen as below.
【Pan section on NUAGE Fader】
Up to two parameters can be displayed and controlled on the Fader screen at the same time, but you
can access more parameters by switching the Section Control button 1-8
153
Hide quick links:
Advertisement
Table of Contents
