Yamaha Nuage Setup Manual page 100

Change the device name shown in the Rename Device field and hit the Enter key. A confirmation
dialog will appear; click Yes and the device's name will be changed (Spaces in names will not be
shown; use hyphens or underscores instead).
Change the name for Nuage I/O in the same way, as shown below.
TIPS：
Do not change "Y001-Yamaha-" written at the beginning of Dante Accelerator's name,
or "Y00X-Yamaha-" witten at the beginning of Nuage I/O. If you change the name, they may not
be able to be seen by the other Yamaha Dante equipment, such as CL digital mixing console.
Therefore, we do not recommend you to do so.
The grid in Dante Controller shows output ports (transmitters) in columns, and input ports
(receivers) in rows. Click the "+" button above Dante Accelerator to expand it horizontally; this lets
you check Dante Accelerator's 128 channels of output.
【Renaming the device name】
100