Samsung IER Series Installation Manual page 32

4. Cabinet + Frame Installation
② Draw the cabinet right up against the frames by aligning the cabinet corners with the
engravings on the frames.
※ For the order of installing cabinets,
※ Check that the four bolts are all inserted into the frames. (See Fig.1.)
③ Push the top surface of the cabinet corners down so that the cabinet slides down diagonally.
(See Fig.2.)
④ From the second row and above, insert the Service Jig between the cabinets and attach
the cabinets. Next, remove the Service Jig and slowly lower the cabinets.
※ Exercise caution to ensure that the Service Jig does not touch an LED module.
※ Each time a cabinet is installed, check that there is no inter-module gap or pitch interval warning found.
Display
unit
Fig.1
see Fig. 1 on page 22 .
Display
unit
Display
unit
Fig.2
Samsung Electronics
(See Fig.3.)
Sliding Screw
Fig.3
31