Samsung IER Series Installation Manual page 25

3. Frame Installation
③ ⓑ Bracket Middle.
Install the
※ First, check the holes into which to fix the ⓓ JIGs. (See Fig.1.)
※ Next, align the ⓓ JIG with the bracket holes and fasten the four screws. (See Fig.2.)
※ Lastly, fasten the screws to fix the ⓑ Bracket Middle to the wall. (See Fig.3.)
※ Caution: The surface ⓓ should be attached to ⓐ and ⓑ. The three surfaces (the wall,
ⓐ and ⓑ, and ⓓ) should be in parallel. (See Fig.4.)
④ Use the same steps above to install all ⓑBracket Middle
in the left-to-right order.
※ Install the Bracket Center in the middle of the Frame Kit.
Fig1. Checking the holes
Fig2. Fixing the Jigs
(with screws)
,
Fig3. Fastening the screws
Samsung Electronics
Incorrect
installation
Fig4. Keeping frames parallel
a b c
b
d
Fig.5 Positions of components to attach
Correct
installation
Wall
ⓐ,ⓑ,ⓒ
ⓓ
b a
24