Samsung IER Series Installation Manual page 102

3-1. [Pivot] IER + IER-F Extension (Up to Down)
• Fasten an IER Pivot Frame and two Frame F Pivots on the JIG.
• Align the JIG Stud with the JIG hole of the Frame.
• Fasten the Frame F Pivot to the wall with screws.
Fig *. Studs for Extension between IER and IER-F (Up to Down)
Hole for
screw
Frame F to
Install
Fig 5. Fastened Shape of the JIG F Pivot
Installed IER
Pivot Frame
Fig 6. IER-F installed at the bottom of IER Pivot
Samsung Electronics
①
10