Samsung IER Series Installation Manual page 98

2-5. IER-F + IER-F L-Type Installation
BRACKET-LINK
• Remove the Insulator Sheet attached to the Bracket Link's assembly part of the Cover Rear.
• Check the Bracket Link assembly marks to make sure that the TOP is assembled with the TOP and the BTM with the BTM.
• Only an end of the Bracket Link has the assembly position guide.
• Insert the Bracket Link through the Bracket Link assembly hole on the Cover Rear, fix the Guide, and fasten the Bracket Link with screws.
• At this time, the Guide of the Bracket Link must be fixed through the Guide Hole of the Plate that protrudes outward (Module Side is exposed).
Insulator
Sheet
Assembly
Direction
Fig 27. Bracket Link Assembly
Bracket Link
Guide
HOLE
Guide
Bracket Link
Fixing the Guide
Fig 28. Bracket Link Direction
Samsung Electronics
Exposure of
Module Side
97