Table of Contents
Advertisement
Quick Links
User Manual
IAB (IAB 146 4K / IAB 110 2K / IAB 146 2K)
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
Advertisement
Table of Contents
Related Manuals for Samsung IAB146 4K
Summary of Contents for Samsung IAB146 4K
- Page 1 You will be informed of the administration fee amount before a technician visits. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
-
Page 2: Table Of Contents
Table of contents Before Using the Product Connecting Devices ID Settings Device ID Safety Precautions Precautions when handling the cabinets Device ID Auto Set Safety symbols PC Connection Cable Installing the product Electricity and Safety Video Wall Installation Connecting the Power Cable Video Wall Operation Horizontal x Vertical... - Page 3 Table of contents Menu Appendix Picture Responsibility for the Pay Service (Cost to Customers) OnScreen Display Not a product defect A Product damage caused by customer's Sound fault Network Others Network Settings (Wired) Licence Network Settings (Wireless) Use WPS System Support Specifications General...
-
Page 4: Before Using The Product
Chapter 01 Before Using the Product Safety Precautions The following safety instructions are to ensure your personal safety and prevent property CAUTION damage. Please read the following to ensure the proper use of the product. RISK OF ELECTRIC SHOCK. DO NOT OPEN. Safety symbols CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). -
Page 5: Electricity And Safety
Warning The product may become damaged by an electric shock. Only use the power cord provided with your product by Samsung. Do not use the power Do not use a damaged power cord or plug, or a loose power socket. -
Page 6: Installation
Have a technician install the wall-mount hanger. seriously affect its performance. • Installation by an unqualified person can result in an injury. Be sure to consult Samsung Customer Service Centre if you want to install the • Only use approved cabinets. product at such a place. -
Page 7: Operation
Be sure to power off the product and disconnect the power cord when water Warning or other foreign substances have entered the product. Then contact Samsung Customer Service Centre. There is a high voltage inside the product. Never disassemble, repair or modify the •... -
Page 8: Cleaning
For IAB 146 4K: 0.84 x 3.5 m = a distance of at least 2.9 m is recommended (The installation manual is available for download at www.samsung.com/displaysolutions.) Do not use humidifiers or stoves around the product. Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be A fire or electric shock may result. -
Page 9: Preparations
Chapter 02 Preparations Checking the Components " Contact the vendor where you purchased the product if any components are missing. Warranty card Waste Electrical & Electronic Quick Setup Guide Regulatory guide " The appearance of the components Equipment (Not available in some locations) may differ from the images shown. -
Page 10: Ports
Ports Ports Description SERVICE Dedicated to service technicians. HDR DATA Connects to the HDR DATA port on the next cabinet. HDR DATA Connects to the HDR DATA port on the previous cabinet to receive video data. Connects to an external IR cable that receives signals from the remote control. AUDIO Outputs sound to an audio device via an audio cable. -
Page 11: Remote Control
Remote Control " Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. " A button without a description in the image below is not supported on the product. Power on the product. - Page 12 Quickly select frequently used functions by Display information about the current input source. pressing it while a content is playing. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Return to the previous menu. Exit the current menu.
-
Page 13: Connecting Devices
Chapter 03 Connecting Devices Precautions when handling the cabinets [Caution to prevent external shock and dropping of the [Caution to prevent damage to the LED] product] After removing the protective brackets, do not place After removing the protective brackets, be careful not the product on the floor with the LED facing down. -
Page 14: Installing The Product
For more information refer to the installation guide. • Samsung shall not be liable for any damage to the product and any injury to the users or others that may be incurred while the users install the product by themselves. -
Page 15: Player Feature
Chapter 04 Player feature Accessible using the HOME button on the remote control. Player Description Select between internal or external memory. HOME → Player → ENTER E Play content, templates and schedules configured on the server. Play a range of content such as channels with schedules assigned, templates or files. •... -
Page 16: When Content Is Running
When content is running Available menu Press the TOOLS button on the remote control during content playback to configure settings. Control buttons on the remote control Menu Description You can play, pause, or skip the content on the playlist by pressing buttons on the remote control. -
Page 17: File Formats Compatible With Player
File Formats Compatible with Player Sound output restrictions • More than one sound output cannot be used. • Supported file systems include FAT32 and NTFS. • Playback priority: network BGM → local BGM → video file in the main frame selected by the •... - Page 18 Supported video codecs Frame rate Bit rate File format Container Video codecs Resolution Audio codecs (fps) (Mbps) *.avi H.264 BP/MP/HP *.mkv HEVC (H.265 - Main, Main10) 3840 x 2160 *.asf Motion JPEG *.wmv Dolby Digital *.mp4 LPCM *.mov MPEG4 SP/ASP ADPCM(IMA, MS) *.3gp Window Media Video v9 (VC1)
- Page 19 Other restrictions Audio decoders • Codecs may not function properly if there is a problem with the content. • WMA is supported up to 10 Pro 5.1 channels, M2 profile. • Video content does not play or does not play correctly if there is an error in the content or •...
- Page 20 Power Point WORD • Compatible document file formats • Compatible document file formats • Compatible document file formats – Extension : ppt, pptx – Extension : pdf – Extension : .doc, .docx – Version : Office 97 ~ Office 2013 –...
-
Page 21: Schedule
Schedule You can check the schedule imported from a selected storage device. " This function may not be supported depending on the model. HOME → Schedule → ENTER E Description Select the saved location of the schedule. Schedule Wednesday, January 13, 12:00 AM Create/Edit/Delete/View schedule of content playback. -
Page 22: Custom Home
Custom Home Enter your 6 digit PIN number. The default PIN number is "0-0-0-0-0-0". If you want to change the PIN number, use Change PIN function. Select an item to run in Custom Home mode. Press the Home key to return to this screen. HOME →... -
Page 23: Clone Product
Clone Product Export settings on the product to an external storage device. You can also import settings from an external storage device. This option is useful when assigning the same settings to several products. HOME → Clone Product → ENTER E When a duplicate file is not found on the external storage device Connect the external storage device, then run the Clone Product... -
Page 24: Id Settings
ID Settings Assign an ID to a set. Device ID HOME → ID Settings → ENTER E Set a unique ID number for each product. " Press u/d to select a number, and press E. " Enter the number you want using the number buttons on the remote control. Device ID Auto Set This feature automatically allots an ID number to a device connected via an RS232C cable. -
Page 25: Video Wall
Video Wall Customise the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the HOME →... -
Page 26: Screen Position
Screen Position To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature. Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form the videowall. To rearrange products, use the direction buttons on the remote control to move a product to another desired number. -
Page 27: Network Status
Network Status Check the current network and Internet connection. HOME → Network Status → ENTER E Network Status " The displayed image may differ depending on the model. -
Page 28: Picture Mode
This menu provides an optimum picture quality suitable for the environment where the product will be used. Picture Mode • Dynamic Standard Movie Live Calibration HOME → Picture Mode → ENTER E Picture Mode " The displayed image may differ depending on the model. -
Page 29: On/Off Timer
On/Off Timer " You must set Clock Set before you can use this feature. On Timer HOME → On/Off Timer → ENTER E On Timer so that your product turns on automatically at a time and on a day of your choice. The power is turned on with the specified volume or input source. -
Page 30: Off Timer
Off Timer Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 Off Timer • Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product. -
Page 31: Ticker
Ticker Input text while a video or image is displayed and display the text on the screen. " You must set Clock Set before you can use this feature. • / On: Set whether or not to use Ticker. HOME →... -
Page 32: Picture
Chapter 05 Menu Picture Description Picture Mode Select the picture mode that best suits your viewing environment. • Dynamic Standard Movie Live Calibration LED Brightness Adjust the brightness of the LED Screen. " Lowering the brightness of the LED screen reduces power consumption. Brightness Contrast Your product has several options for adjusting picture quality. - Page 33 Description Advanced Settings Configure advanced picture settings to create your preferred picture. Picture Enhancer Displays enhanced colour and sharpness. Colour Adjust the colour saturation levels. Colour saturation intensifies as the value nears 100. (Range: 0~100) Tint (G/R) Adjust the ratio of green to red tint levels. Increasing values intensifies the saturation of red and green colours. (Range: 0~50) White Balance Adjust the colour temperature of the picture so that white objects appear brighter.
- Page 34 Description Advanced Settings Colour Space Settings Configure colour space settings to refine the spectrum of colours on your screen. • Colour Space Choose a colour space. " To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom. Input Signal Plus Expands the input signal range for HDMI connections.
- Page 35 Description Picture Options Colour Tone Select the colour tone that best suits your viewing preferences. " Settings can be adjusted and stored for each external device connected to an input on the product. " Available options may vary depending on the product. Digital Clean View Reduce picture noise to avoid distractions such as flickering.
- Page 36 Description Picture Size Settings Choose size and aspect ratio picture displayed on screen. " Some external devices and applications may not support this function. Picture Size Different screen adjustment options are displayed depending on the current input source. " Available functions may differ depending on the model or input signals. "...
-
Page 37: Onscreen Display
OnScreen Display Description Screen Protection Screen Saver Activate a screensaver when your device displays a still image for two hours or more. Message Display Source Info Select whether to display the source OSD when the input source changes. No Signal Message Select whether to display the no-signal OSD when no signal is detected. -
Page 38: Sound
Sound Description Sound Mode You can select a sound mode to suit your personal preferences. " This function is disabled when Sound Output is set to External Receiver (HDMI-eARC). Balance Adjust speaker volume levels for sound balance optimisation. " This function is disabled when Sound Output is set to External... - Page 39 Description Sound Output Select speakers for sound output. " When you set Sound Output External Receiver (HDMI-eARC), the internal speaker is turned off. You will hear sound through the external speakers only. " The audio is available both for internal and external speakers while connected via the AUDIO port with the Sound Output...
-
Page 40: Network
Network Description Network Status You can check the current network and Internet status. Open Network Settings Configure network settings to connect to an available network. Network Type " Network Type menu may not be available in Wired models. -
Page 41: Network Settings (Wired)
Network Settings (Wired) • Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable. See the diagram below. - Page 42 Set the network connection to use Internet services such as perform software upgrades. How to set up manually Network Type Wired from the Open Network Settings page. Automatic Open Network Settings (Wired) The network test screen appears and the verification process starts. Press Cancel. The verification process stops.
-
Page 43: Network Settings (Wireless)
" If the desired wireless router does not appear, select Refresh to search again. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the " If the router cannot be found after retrying, select the Network. - Page 44 Manual Network Setup (Wireless) How to set up manually Network Type Wireless from the Open Network Settings page. Offices may use static IP addresses. Network function searches for available wireless networks. When done, it displays a list If this is the case, ask the network administrator for the Address, Subnet Mask,...
-
Page 45: Use Wps
Use WPS " This function may not be supported depending on the model. How to set up using Use WPS If your router has a Use WPS button, follow these steps. Network Type Wireless from the Open Network Settings page. Select WPS, press E. - Page 46 " Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using port number 7001, check with your server administrator to find the correct port number and then change the port number.) " For the MagicInfo Server user guide, visit the following website: http://displaysolutions.samsung.com → Support → Resources → MagicInfo Web Manual.
-
Page 47: System
System Description Accessibility High Contrast Set the background and font to high-contrast colours in Menu. Menu transparencies become opaque when the option is selected. Enlarge Enlarge the size of the Menu area. Start Setup Go through the initial setup steps like you did the first time you used this product. "... - Page 48 Description Auto Source Switching Auto Source Switching Switch to preset source or another source when the main source device gets disconnected. Primary Source Recovery Select whether to restore the selected primary input source when a primary input source is activated. "...
- Page 49 Description External Device Manager Manage external devices connected to your signage. Input Device Manager Set up keyboards to use with your product. You can add keyboards and configure their setting. " Available for Bluetooth enabled models only. • Bluetooth Device List Connect a Bluetooth keyboard, mouse or gamepad to your product.
- Page 50 Description Play via Select the appropriate Play via mode depending on the environment where you are using the product. The home screen may be different depending on the setting. Change PIN Change your 6-digit Personal Identification Number (PIN). Choose any 6 digits for your PIN and enter it in Enter a new PIN..
- Page 51 MagicInfo Premium application and published to the USB device you are using. The MagicInfo Premium application programme is available on the website. (http:// displaysolutions.samsung.com) " When published to a USB device, your Published Content is saved to Contents and Schedules folders in the root folder of the connected USB device.
- Page 52 Description Security Remote Management You can Allow Deny external commands to access your product via a network. Secured Protocol Secure the protocol between this device and other devices. • SNMP Settings Set up your ID and password for the SNMP connection. Server Security Status You can view the MagicINFO server information.
- Page 53 Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote control. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
- Page 54 Troubleshooting for Anynet+ Problem Possible Solution • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connections. •...
- Page 55 " You can download a custom logo into the product from an external USB device. " The file name of the custom logo you want to download must be saved as “samsung” in all small letters. " When there are multiple numbers of external USB connections, the product will attempt to download the custom logo from the last device that has been connected to the product.
- Page 56 Description General DICOM Simulation Mode Adjust the display mode to output a picture close to the GSDF standard of DICOM Part 14. " This device cannot be used as a medical diagnostic device, even if the DICOM Simulation Mode is enabled. Director Mode Minimises image processing to display the movie director's original intention on screen.
-
Page 57: Support
• Updating via USB Device Download the update package from Samsung's website to a USB storage device and then connect the device to the product to update the product's software. " Remember to save the update package to the top-most directory of the USB device. Otherwise, the product will not be able to find the update package. - Page 58 Description Contact Samsung You can view the address of the Samsung website, the call centre phone number, your product's model number, software version, Open Source Licence and other information. " Go to Contact Samsung and find the product Model Code Software Version.
-
Page 59: Specifications
Chapter 06 Specifications General Model Name IAB 146 4K IAB 110 2K IAB 146 2K Pixel Pitch 0.84 mm 1.26 mm 1.68 mm LED pixel configuration Flip-chip RGB LED Cabinet Pixels (Row x Column) 240 x 180 pixels 160 x 120 pixels 120 x 90 pixels Aspect ratio (W:H) 16:9 (806.4 x 453.6) - Page 60 This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimises the monitor settings. Monitor installation takes place automatically. However, you can customise the installation settings if desired. • For detailed device specifications, visit the Samsung website. • (Europe only) To access energy labelling information about this product on the European Product Registry for Energy Labelling (EPREL), go to https://eprel.ec.europa.eu/qr/******...
-
Page 61: Preset Timing Modes
Preset Timing Modes " This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a " Horizontal Frequency resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution The time required to scan a single specified for your product. - Page 62 Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution HDMI 1~3 (kHz) (Hz) (MHz) (H/V) VESA, 800 x 600 46.875 75.000 49.500 P / P Mac, 832 x 624 49.726 74.551 57.284 N / N VESA, 1024 x 768 48.363 60.004 65.000 N / N...
- Page 63 Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution HDMI 1~3 (kHz) (Hz) (MHz) (H/V) CEA-861 VIC 16, 1920 x 1080 67.500 60.000 148.500 P / P CEA-861 VIC 18, 720x576 31.250 50.000 27.000 N / N CEA-861 VIC 19, 1280x720 37.500 50.000 74.250...
- Page 64 IAB 110 2K / IAB 146 2K Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution HDMI 1~3 (kHz) (Hz) (MHz) (H/V) IBM/VESA, 640 x 480 31.469 59.940 21.175 N / N Mac, 640 x 480 35.000 66.667 30.240 N / N VESA 640 x 480 37.861 72.809...
- Page 65 Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution HDMI 1~3 (kHz) (Hz) (MHz) (H/V) VESA, 1920 x 1080 67.500 60.000 148.500 P / P CEA-861 VIC 3, 720(1440)x480 31.469 59.940 27.000 N / N CEA-861 VIC 4, 1280x720 45.000 60.000 74.250 P / P...
-
Page 66: Appendix
External impact or drop. " When the service is requested, in spite of in warranty, we may charge you for a visit from a • Use of supplies or separately sold product unspecified by Samsung. service technician in the following cases. •... -
Page 67: Licence
The terms HDMI and HDMI High-Definition Multimedia Interface, and the You may find a copy of the source at following website. HDMI Logo are trademarks or registered trademarks of HDMI Licensing http://opensource.samsung.com Administrator, Inc. in the United States and other countries. http://software-dl.ti.com/processor-sdk-linux/esd/AM335X/latest/exports/software_...