Power Connection - Ricoh Pro C550EX Operating Instructions And Troubleshooting

• Places where the machine will be subject to frequent strong vibration.
• Dusty areas.
• Areas with corrosive gases.
Access to the machine
Place the machine near the power source, providing the clearance areas shown.
1. Rear: 0 cm (0 inches) or more
2. Right: 4 cm (1.6 inches) or more
3. Front: 70 cm (28 inches) or more
4. Left: 10 cm (4 inches) or more
• For the required space when options are installed, contact your service representative.

Power Connection

This section describes power supply.
• Connect the machine only to the power source described on the inside front cover of this manual.
Connect the power cord directly into a wall outlet and do not use an extension cord.
• Do not damage, break or make any modifications to the power cord. Do not place heavy objects
on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric
shock or fire.
BAZ064S
Where to Put Your Machine
103
5