When Memory Is Full - Ricoh Pro C550EX Operating Instructions And Troubleshooting

2. Troubleshooting When Using the Copy/Document Server Function
Problem
There is no response when
you press [Connect Copy].
2
There is no response when
you press [Connect Copy].
There is no response when
you press [Connect Copy].

When Memory Is Full

This section describes likely causes of and possible solutions for problems related to full memory.
Message
"Press [Continue] to scan and
copy remaining originals."
40
Cause
A paper misfeed has
occurred on either the main
machine or sub-machine.
The [Clear/Stop] key is
pressed on the main machine.
Toner or other supplies need
to be replaced on either the
main machine or sub-
machine.
Cause
The machine checked if the
remaining originals should be
copied, after the scanned
originals were printed.
Solution
• Follow the instructions displayed.
For details, see p.71 "Removing
Jammed Paper" and p.92
"Removing Jammed Staples".
• If the sub-machine's display
indicates that a cover is open,
follow the instructions displayed.
• To cancel Connect Copy, Press the
[Clear/Stop] key on the main
machine, and then press [Stop].
To cancel Connect Copy, Press the
[Clear/Stop] key on the main machine,
and then press [Stop].
• Follow the instructions displayed.
For details, see p.43 "Loading
Paper", p.64 "Adding Toner",
p.67 "Adding Staples", and
p.97 "Removing Punch Waste".
• To cancel Connect Copy, Press the
[Clear/Stop] key on the main
machine, and then press [Stop].
Solution
To continue copying, remove all copies,
and then press [Continue]. To stop
copying, press [Stop].